Flexible silicon frame with polycarbonate shield ensures a crystal clear view. Silicon frame provides a good seal with the face making it ideal for everyday use. High quality materials and certified checks ensures they can be reused after sanitizing.
Material- Silicon body with Polycarbonate Shield
Quality Standard- BS EN 166/ 2002 ; European Standards for eye-protectors
Made of durable and high quality PVC and it is resusable and recyclable. This face shields acts as a barrier against chances of infection.
Size- 230mm x 300mm
Thickness- 400 microns
Double Walled, Outer made of mild steel & Inner is made of either High anodized Aluminium / Highly polished Stainless Steel lagged with Glass Wool. Three side elements made of Wire. Temperature is controlled by sensitive hydraulic thermostat with + 10C accuracy Temperature range 50° C TO 250° C.
Incubators are sturdy double walled units.Inner chamber made of S.S. and outer made of Mild Steel with Powder coating.Double wall door with double glass window for observation in the chamber.Gap between the walls fitted with glass wool insulation to avoid heat loses. Heating elements are made of high grade chrome plated nichrome wire. Temp. is controlled by thermostat Temp. Range 5 ºC Above ambient to 80º C and Accuracy: + 2 C. Air Ventilations is provided on the top of the unit to remove the hot gases/fumes. In Lab type Incubators heaters are placed in the bottom side of the unit. All the control switches & pilot lamps are fitted on the front panel.
A pocket refract meter designed on the principle of total reflection for measuring the refractive index. Built in ocular scale, on inspection, gives direct reading for percentage of sugar density
- Range 0-32% in division of 0.2%
- Range 28-62% in division of 0.2%
- Range 58-92% in division of 0.2%
A versatile, electrically heated sterilizer under saturated steam of adjustable pressure of 10 to 20 psi. Double walled construction with boiler & steam jackets made of thick stainless steel. The outer chamber is made out of thick mild steel/Stainless Steel. The lid is made out of thick stainless steel plate (joint less) or gunmetal and can be sealed by a joint less neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air/steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy ± 3 psi. All autoclaves are fitted with standard accessories, such as, a drain cock, pressure gauge, steam release cock, spring loaded safety valve and heating element, but supplied without dressing bins.
Temperature range from ambient temperature to 80° C. Thermostatic control with accuracy of ± 0.5° C to 1°C. Double walled, inside stainless steel and outside mild steel painted in epoxy powder coating. Bath consists of two pilot lamps. Temperature control knob and on/off switch. To work on 220/230 volts A.C. Supplied with or without stirring arrangement, without racks and thermometer. Lid of water bath is made of stainless steel sheet.
Owing to the dedication of our distinguished professionals, we have gained reputed position across the market as one of the pioneer manufacturers and exporters of Mortuary Chamber. Our offered chambers are manufactured in compliance with industrial standards using superior quality metals. Highly used in hospitals and labs for storing cadaverous under low temperature & cold conditions, we are offering these chambers to our clients in different range. Our Mortuary Chamber is corrosion resistant and appreciated among our clients for its sturdy structure and durability.
BTI130 Mortuary Chamber
Mortuary Chamber is specially designed to accommodate cadaverous under cool condition to prevent decomposition and offering vast space saving advantage over the conventional types together with greater hygiene.
Double- walled with steel panel for outer surface and stainless steel inner chamber with insulation in between, front opening hinged insulated doors lined with magnetic gasket, handle and lock arrangement with keys in duplicate for individual dead travel on rollers fitted with ball bearing for easy movement. Exterior surface of Mortuary Storage Cabinets is chemically treated against coated and duly finished with hammer tone paint. To avoid any moving part in side the cabinet for easier maintenance and cleaning view point, refrigeration unit is kept outside the chamber and fixed at near top. Temperature of -20C to 50C or – 15 to 200C is maintained by hermetically sealed refrigerator unit. Temperature controller is mounted on front panel, provided on front top, along with pilot lamp, main switch etc. supplied complete with trays, cord and plug. Suitable to work on 220 volts AC.
Vaccine storage cabinet, the most versatile unit for vaccine storage. Inner chamber made of stainless steel external mild steel sheet body of rigid steel frame. Insulated thoroughly provided with face fitting doors, complete with self- closing hinges lockable fasteners. Cabinet is fully sealed to avoid spilling and contamination from external environment. Temp. ranges from 4° C to 6° C. Available in various sizes for keeping vaccines bottles. Drawers with clear Perspex fronts and index card holders. Temp. Controlled and displayed by Microprocessor PID digital temperature controlled-cum-indicator. Audio visual alarms are triggered, in the event of fluctuations exceeding permitted tolerance level. Suitable to work on 220 V, single phase, 50 Hz, AC supply.
Available in following size:-
- 450x400x850 mm.
- 600x675x850 mm.
We have marked a distinct and dynamic position in the market by manufacturing, exporting and supplying a high quality Student Dissecting Microscope. The provided microscope is widely used for science dissection projects to view a live image on computer screen. This microscope is manufactured at our advanced production unit using pristine quality components and sophisticated techniques under the supervision of our deft professionals. Moreover, the provided Student Dissecting Microscope can be easily purchased from us at nominal rates.
Accumulated With :-
- Brass parts complete
- 2 eyepieces 10x and 20x
- Packed in Thermo box
- Wooden Box
- Long service life
- High functionality
- User friendly interface
- Hassle free performance
A modified model of medico centrifuge ideal for routine requirements of medical practitioners, pathological laboratories and hospitals. Fitted with resiliently mounted motor for vibration free performance, with specially wounded 5 step transformer speed regulator. The highly sophisticated elegant body of the equipment is made of fibre reinforced plastic, which gives protection against corrosion and electric shock.
Technical Specifications :-
- Max Speed : 3600 rpm
- Motor H.P. : 1/20
- Single phase, 50 Hz AC/DC
- Max. RCF : 1800 x g
- 230 volts
- A 4 x 15 ml tubes.
- B 6 x 15 ml tubes.
- C 8 x 15 ml tubes.
It has a compact stirring device utilizing magnetic field (created by a PERMANENT MAGNET) which induces variable speed stirring action. Stirring is accomplished by means of small ptfe rotor, which when placed to be stirred is capable or rotation by magnetic field applied from below the container. The unit is fitted with pilot lamp. Works on 220/230 volts A.C.
- 1 litr.
- 2 ltrs.
- 5 ltrs.
- BTI146 Laboratory Stirrer
- BTI 147 Tissue Homogeniser
- BTI148 Rotary/ VDRL Shaker
- BTI149 Shaking Machine (Wrist Action)
- BTI 150 Reciprocating Shaking Machine (Kahn Rack Type)
- BTI151 Rotary Shaker (Platform Type)
- BTI152 Vacuum Rotary Evaporator (Buchi Type)
- BTI153 Vortex Shaker /Cyclo Mixer
- BTI154 Ball Mill
- BTI155 Vacuum Pump
- BTI156 Lab Willey Grinder (Arthur H. Thomas Type)
- BTI157 Infra Red Moisture Balance